Scope

• Discharge: 50 – 100 mm

• Motor Power: 0.4 – 7.5 kW (3 phase)

• Performance:

  • Capacity: 0.03 – 1.6 m³/min

  • Head: 2.5 – 39 m

Liquid

• Type: Dirty Water

• Maximum Temperature:

  • 40°C (Manual and A Type)

  • 32°C (J Type)

• Max. Solids: Refer to table below

Submergence

• Maximum:

  • 8 m (2.2 – 7.5 kW)

  • 4 m (0.4 – 1.5 kW)

• Minimum: Refer to low water level (L.W.L.) in dimensions

Construction

• Impeller: Semi-open (with strainer)

• Mechanical Seal: Oil lubricated, single spring double mechanical seal

Materials

• Casing: Cast Iron

• Impeller: Cast Iron

• Suction Cover:

  • Stainless Steel (0.4 – 1.5 kW)

  • Cast Iron (2.2 – 7.5 kW)

• Shaft: 403 Stainless Steel

• Motor Frame: Cast Iron

• Fasteners: 304 Stainless Steel

• Mechanical Seal:

  • Upper Faces: Carbon / Ceramic

  • Lower Faces: Silicon Carbide / Silicon Carbide

  • Lubricating Oil: Turbine Oil VG32 (SAE10W/20W)

Motor

• Type:

  • Air filled dry submersible

  • IP68

  • Class E insulation (0.4 kW)

  • Class F insulation (others)

• Nominal Speed: 2900 rpm

• Applicable Voltages: 380 / 400 / 415 Volt, 3 phase, 50 Hz

• Starting: DOL

• Protection: Inbuilt overload protection

• Bearings: Pre-lubricated sealed ball bearings

Cable

• Length:

  • 6 m (0.4 to 1.5 kW)

  • 10 m (2.2 to 7.5 kW)

Accessories

• Flange:

  • Screwed oval type (50Ø, 0.4 – 1.5 kW)

  • Discharge elbow with screwed companion flange (50Ø 2.2 & 3.7 kW, all 65 & 80Ø sizes)